ZN-AT68 Alcohol Tester | 0-0.95mg/L High Accuracy | LED Display Blowing Type
$22.00
$27.18
-19% OFF
Global Shipping
Easy Returns
Secure Payment
Product Description
Specification:Model: AT68 Sensor Type: Semiconductor type sensorDisplay: LED displayHousing material: ABS plasticTest range: 0.00-0.19% BAC (0-0.95mg/l)Measurement units: mg/l(BrAC), m/l(BAC), %BAC, mg/100mlMeasurement mode: Quick check, automatic detectionMeasurement time: 10 secondsPower supply: Built-in rechargeable lithium polymer batteryBattery used: 3.7V 150mAh Power adapter requirement: DC5V 1ACharging current: 180mAOperating temperature: 0-45??CWarm-up time: 10 secondsBlow time: within 10 seconds, >4 seconds requiredReaction time: less than 5 secondsProduct size: 100 x 26 x 18mmProduct weight: 35gPackage size: 120 x 45 x 32mmPackage weight: 78g
Reference standard:
BAC: Blood Alcohol Concentration (BAC)BrAC: Breath Alcohol ConcentrationDrinking and driving: The blood alcohol content in the body is greater than or equal to 0.15mg/l and less than 0.25mg/l.DUI: Blood alcohol content greater than or equal to 0.25mg/l.
Instructions for use:
1. Power on: Press and hold the power on button for 1 second, after a beep, the LCD screen of the tester will start. 2.2. Preheat: The "Preheat" character appears on the display and the number in the upper left corner starts counting down from 10 to 00. 3.3. Blow test: After the "warm-up" is completed, the tester enters the "blow" state and the blow character appears on the display, with the numbers counting down from 10 to 00. Blowing within this countdown time, the machine senses the gas, the buzzer "beep" prompted to stop blowing. 4.4. Display of results: The test results are read on the display. Press and hold the power button for 1s to switch the unit, i.e. the unit flashes after the value, press and hold again for 1s to exit.5. 10s after the test result is displayed the unit automatically switches off. Switch on again for the next test. Test result description:
1. If the result of alcohol concentration is 0mg/L, the warning light will not respond.2. If the alcohol concentration is >0mg/L and <0.15mg/L, a "safe" character appears on the display and the green warning light flashes.3. If the alcohol concentration is ??0.15mg/L and <0.25mg/L, a "warning" character appears on the display and the yellow warning light flashes, accompanied by a "beep" tone.4. If the result of alcohol concentration is ??0.25mg/L, the character "Danger" appears on the display, the red warning light flashes and a "beep" beeps.
Package included:
1 x Alcohol Tester1 x Instruction manual1 x Data cable
Customer Reviews
No reviews yet. Be the first to review this product!
