CC2531 CC2540 USB Programmer & Sniffer Board - Bluetooth Module Emulator with Antenna
Product Description
Features:
1. It can lead to 8 IO ports.
2. Implement debugging pins.
3. It has the function of matching firmware to the analyzer.
Specifications:
- Model: CC2531
- Size: 4.1*1.6cm
- Board thickness: 1.6mm
- Working frequency: 2.405-2.485GHz
- Wireless transmission rate: 250Kbaud
- Power consumption: <20mA (receiving); <25mA (transmitting)
Size of the programmer downloader board:
Length: 29.65mm
Width: 27.46mm
Height: 10.95mm
CC debugger:
Description | CC Debugger is a small programmer and debugger for TI's low-power RF system-on-chip. It can be used with IAR Embedded Workbench for 8051 (7.51A or higher) for debugging and SmartRF Flash Programmer for flash memory programming. It is also available To control the selected device from SmartRF Studio. |
Features | 1. Inside the box Mini USB cable, 10-pin flat cable with 2.54 mm connector 2. CC-Debugger can be used to program and debug the following 8051-based systems on chip from Texas Instruments (TI): CC1110, CC1111??CC2430, CC2431??CC2510, CC2511??CC2530, CC2531, CC2533??CC2540, CC2541??CC2543, CC2544, CC2545 3. The same equipment from SmartRF Studio can be used. In addition, CC-Debugger can support the following transceivers of SmartRF Studio: CC1120, CC1121, CC1125, CC1175 CC1100, CC1101, CC110L, CC113L, CC115L CC2500, CC2520 4. It can also be used to charge PurePath wireless devices: CC8520, CC8521, CC8530, CC8531 5. CC debugger is suitable for IAR EW8051 7.51A or higher |
Package included:
1 x CC2531 / CC2540 sniffing board with antenna
1 x programmer downloader cable
1 x CC debugger
Customer Reviews
No reviews yet. Be the first to review this product!
